|
Блоки обработки - Световые завесы и решетки SIMATIC FS400 |
Модули обработки 3RG78 47 представляют собой гибкое семейство интерфейсных модулей световых барьеров и решеток. Модульную конструкцию семейства продуктов можно использовать до 4 категории согласно IEC/EN61496-1,-2.
Модуль обработки расширяет функциональное scope световых барьеров и решеток с start-up and restart inhibiting и contactor control, а также в зависимости от типа устройства циклическое управление и muting.
Семейство продуктов предлагает расширенный диапазон дополнительных функций, таких как раннее предупреждение об отказе релейных контактов, диагностику с использованием ПК, а также различные аварийные выходы для системы управления верхнего уровня |
Технические данные
Outputs
|
Relay outputs
|
OSSD safety outputs
|
2 safety-related NO contacts
|
Operational voltage/current switched
|
60 V DC , 250 V AC, max. 6 A
|
- Only with extended versions
|
1 safety-related NC contact, 60 V DC, 250 V AC, max. 6 A, minimum switched current 20 mA
|
OSSD external fusing
|
6 A T
|
OSSD response time of processing unit (without light curtain)
|
|
- With light curtain, type 4, with semiconductor output
|
22 ms
|
- With light curtain, type 2
|
64 ms
|
|
64 ms
|
OSSD reactivation time
|
100 ms
|
OSSD suitable spark quenching
|
Required
|
through coils of the successor relays
|
|
Standard processing units
Type
|
3RG78 47-4BA
|
Safety category to EN 954-1
|
up to 4 (depending on the category of the upstream protective device)
|
Supply voltage
|
24 V AC/DC , ±20%
|
Power consumption
|
1.5 W (supplied via AODP)
|
Safety switching outputs (OSSD)
|
2 relay outputs (NC contact)
|
Signaling output
|
Relay output (NC contact)
|
Continuous current per current path, max.
|
3 A
|
Response time
|
10 ms
|
Reactivation time
|
20 ms
|
Current consumption (inputs B1 and B3)
|
32 mA each
|
Permissible input resistance
|
50 Ω
|
Permissible ambient temperature
|
|
|
0 °C ... +50 °C
|
|
-25 °C ... +70 °C
|
Protection class
|
II
|
Type of protection
|
IP20
|
Connection method
|
Screw terminals
|
Dimensions (W x H x D)
|
17.5 mm x 99 mm x 113.6 mm
|
Assembly
|
on 35 mm mounting rail
|
Type
|
3RG78 47-4BB
|
Safety category to EN 954-1
|
Category 4
|
STOP category according to EN 60204-1 (11/ 98)
|
STOP category 0
|
Supply voltage
|
24 V AC/DC, -15% ... +10%
|
Residual ripple (with DC)
|
2.4 Vss
|
Frequency (AC)
|
50 ... 60 Hz
|
Power consumption
|
2.1 W (AC)/1.7 W (DC)
|
External fusing of supply circuit
|
1 A slow-action
|
Output contacts
|
2 NO,
1 NC AgSnO2, gold-flashed
|
Switching capacity according to EN 60947-5-1
|
|
|
6 A
|
- DC-13, 24 V (360 switching cycles/h)
|
6 A
|
- DC-13: 24 V (3600 switching cycles/h)
|
3 A
|
Max. continuous current per current path
|
6 A
|
Contact fusing per current path
|
6.3 A quick-action or 4 A slow-action
|
Max. summation current of all current paths
|
12 A
|
Mechanical service life
|
10 106 switching cycles
|
Switching frequency
|
3600 switching cycles/h
|
ON delay
|
|
|
70 ms
|
|
230 ms
|
Returning time, response time
|
20 ms
|
Minimum ON period S34, S35
|
80 ms
|
Electronic fuse protection
|
|
|
2 sec
|
|
2 sec
|
Control voltage/current at S11, S22, S31
|
24 V DC/20 mA
|
Permissible power input resistance
|
< 70 Ω
|
Emitted interference
|
EN 50081-1, -2
|
Noise immunity
|
EN 50082-2
|
Air gaps and creepage distances according to DIN VDE 0110 (04.97)
|
4 kV
|
Operating temperature
|
25 °C ... +55 °C
|
Type of protection
|
|
|
IP40
|
|
IP20
|
Connection cross-sections
|
|
|
2 x 0.14 ... 0.75 mm2
|
- Finely stranded with end sleeve
|
2 x 0.25 ... 0.5 mm2
|
- Finely stranded with twin end sleeve
|
2 x 1.5 mm2
|
|
1 x 0.14 to 2.5 mm2
|
- Finely stranded with end sleeve
|
2 x 0.25 to 2.5 mm2
|
Intelligent processing units
Type
|
3RG78 47
|
Protection according to EN, IEC 61496-1
|
Type 4
|
Safety category to EN 954-1
|
Category 4
|
STOP category according to EN 60204-1 (11/ 98)
|
STOP category 0
|
Supply voltage
|
24 V DC ± 20%, external power pack with safe isolation and compensation of 20 ms voltage dip is required
|
Current consumption
|
Approximately 200 mA without external load
|
External fusing (power supply)
|
2.5 A mT
|
Connectable safety sensors (extended versions)
|
1 light curtain, type 4, or up to 2 light curtains, type 2 (all according to IEC 61496)
Up to 2 light curtains, type 4, or up to 4 light curtains, type 2 (all according to IEC 61496)
|
Test outputs T1 and T2, test interval
|
200 ms
|
Available functions
|
|
|
Startup/restart inhibit, contractor control, diagnostics
|
- Versions with cycle control
|
Protective, single-cycle and two-cycle operation
|
- Versions with muting function
|
Sequential muting, parallel muting, parallel double muting (only 3RG78 47-4.G)
|
Control inputs
|
|
|
Reset of positive-action contacts of downstream contactors
|
- Start/restart inhibit (reset)
|
Floating NO (switch or key switch)
|
Connection
|
|
- Non-testable muting sensors
|
Signal level in damped state: active high, +24 V
|
|
Active high, +24 V, plus test pulses T1 or T2
|
Outputs
|
|
- Muting displays for lamps 24 V, max. 5 W
|
pnp switching outputs, muting function on, active high, +24 V, max. 200 mA
|
- Signaling outputs (depending on version)
|
Light curtain free/interrupted; switching status relay/transistor output; restart inhibit locked/unlocked; muting function status; muting error; warning defective muting lamp, internal error, etc.
|
Operating temperature
|
0 ... +55 °C
|
Type of protection
|
IP20; must be built into control cabinet or housing with degree of protection of minimum IP54
|
Installation
|
Mounting on 35-mm mounting rail
|
Connection method
|
Pluggable, coded screw terminals up to 2.5 mm2
|
|
ЧертежБлок обработки, вид сбоку:
3RG78 47-4BA
3RG78 47-4BB
3RG78 47-4.D/E/H/J
3RG78 47-4.F/G/K/L
3RG78 47-5BG/DG
3RG78 47-5BF/DF
|
Схема подключенияStandard processing unit 3RG78 47-4BA
Standard processing units 3RG78 47-4BB
Standard processing unit 3RG78 47-4BD
Processing units with integrated muting function 3RG78 47-4BF / 3RG78 47-5BF
Processing unit with cycle control 3RG78 47-4BH
|
Заказные данные
Заказной № | Описание | Вес (кг) | Доставка | Мин. зак. (шт) |
3RG7825-1CB1 | SIGUARD ОЦЕНИВАЮЩИЙ МОДУЛЬ РЕЛЕЙНЫЕ ВЫХОДЫ ДЛЯ СВЕТОВЫХ БАРЬЕРОВ | 0.455 | 3 - 5 недель (A) | 1 |
3RG7847-4BA | RELAY MODULE FOR LIGHT CURTAINS 2 TRANSFORMERS, 2 NC | 0.237 | 6 - 8 недель (C) | 1 |
3RG7847-4BB | SIGUARD ПРЕОБРАЗОВАТЕЛЬ ДЛЯ СВЕТОВЫХ БАРЬЕРОВ ДВУХ КАНАЛЬНЫЙ КОНТАКТЫ 3НО+ 1НЗ | 0.237 | 3 - 5 недель (A) | 1 |
3RG7847-4BD | SIGUARD ПРЕОБРАЗОВАТЕЛЬ СТАНДАРТНЫЙ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.332 | 3 - 5 недель (A) | 1 |
3RG7847-4BE | SIGUARD ПРЕОБРАЗОВАТЕЛЬ СТАНДАРТНЫЙ, РАСШИРЕННЫЙ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.393 | 3 - 5 недель (A) | 1 |
3RG7847-4BF | SIGUARD ПРЕОБРАЗОВАТЕЛЬ ДЛЯ СВЕТОВЫХ БАРЬЕРОВ СО ВСТР. СГЛАЖИВАЮЩЕЙ ФУНК. ДВУХ КАНАЛЬНЫЙ | 0.453 | 3 - 5 недель (A) | 1 |
3RG7847-4BG | SIGUARD ПРЕОБРАЗОВАТЕЛЬ С ПОДАВЛЕНИЕМ, РАСШИРЕННЫЙ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.527 | 3 - 5 недель (A) | 1 |
3RG7847-4BH | SIGUARD ПРЕОБРАЗОВАТЕЛЬ С ТАКТИРОВАННЫМ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.35 | 6 - 8 недель (C) | 1 |
3RG7847-4BJ | SIGUARD ПРЕОБРАЗОВАТЕЛЬ С ТАКТИРОВАННЫМ, РАСШИРЕННЫЙ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.413 | 6 - 8 недель (C) | 1 |
3RG7847-4BK | SIGUARD ПРЕОБРАЗОВАТЕЛЬ С ПОДАВЛЕНИЕМ, С ТАКТИРОВАННЫМ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.445 | 6 - 8 недель (C) | 1 |
3RG7847-4BL | SIGUARD ПРЕОБРАЗОВАТЕЛЬ С ПОДАВЛЕНИЕМ, С ТАКТИРОВАННЫМ РАСШИРЕННЫЙ РЕЛЕЙНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ БАРЬЕРОВ /-РЕШЕТОК | 0.515 | 6 - 8 недель (C) | 1 |
3RG7847-5BF | SIGUARD ПРЕОБРАЗОВАТЕЛЬ ДЛЯ ПРЕОБРАЗОВАТЕЛЕЙ С ИНТЕГРИРОВАННОЙ ФУНКЦИЕЙ ПОДАВЛЕНИЯ 2-КАНАЛА | 0.453 | 6 - 8 недель (C) | 1 |
3RG7847-5BG | SIGUARD ПРЕОБРАЗОВАТЕЛЬ ДЛЯ ПРЕОБРАЗОВАТЕЛЕЙ С ФУНКЦИЕЙ ПОДАВЛЕНИЯ ТРАНЗИСТОРНЫЙ ВЫХОД ДЛЯ СВЕТОВЫХ РЕШЕТОК/БАРЬЕРОВ | 0.527 | 6 - 8 недель (C) | 1 |
3RG7848-4AC | ДИАГНОСТИЧ. ПРОГРАММНОЕ ОБЕСПЕЧЕНИЕ ДЛЯ ОБРАБАТ. ПРИБОРОВ ВКЛ. PC-КАБЕЛЬ | 0.214 | 3 - 5 недель (A) | 1 |
| |
|
|